Elliysse Cafe: STELLACEPT: Creation Guide Part 2

This post is for Armor Creation but first let me discuss few things related to armors. For armor creation you need the armor parts, the armor is divided into two parts..

The In-part, which is the body part of the armor

And the Out-part is the extremity part of the armor.

If you notice each part's class and ranking type differs. Broad In-part shows for S2 ranking and Baum Out-part is for G5 ranking. For the pure Class Ranking build types you need both parts that has the same Class while Hybrid class types needs two different class type of parts.

After the armor or weapon creation you will see the armor or weapon's ranking type, stat, grade and slot.
Ranking type and stat will depend on the parts that you used. While grade and slot will be random.

Armor and weapon Grade is from E the lowest then D, C, B, A and S the highest. You can get better stats on higher grades.

While armor and weapon slot is from none to 1 slot and 2 slot the highest. You can put an ark on these slots which gives additional stat or effect to the weapon or armor. What arks are? I'll discuss it on the next part of this post which is for remodelling armor and weapon.

So slots are given randomly on the equipments after the creation either that or use star gem to add the slots intentionally using the customizer device. How?
First is to get the Add slot item which you need to spin at the cash shop 1 spin per star gem.

Chances are you have to be super lucky to get it. Once you got the item go to the customizer device.

Then tap on Add slot.

Everything is easy from here.

If you'r going to buy weapons and armors you'll notice that the prices for the same kind will differ from the item's grade and slot.
It's better to get a low graded armor/weapon that has 2 slot than getting a higher grade but has 1 slot or sadly none.

Now let's go to Armor creation.

You also need 3 materials for armor creation. You need 1 armor magi and 2 armor part, 1 in-part and 1 out-part. I'm going to create here a M3 Robe Neptz armor and so I prepared 1 armor magi, Robe in-part and Neptz out-part. Creation will just be the same as the weapon creation.

Step 1.

Boot up the creation device

Step 2.

Tap on Create armor

And yes you're right we need to fill all slots again.

Step 3.

The first slot will always be for the Magi. So here's an Armor Magi.

Step 4.

The second slot is for the in-parts. So here I chose my Robe In-part.

Step 5.

And the third slot is for the out-parts. So i chose the neptz part.

There goes all 3 slots.

Step 6.

And here's the first look then tap ok at anytime. Support button? That's for creation support by using an item like creation card A or B or higher this will make sure that you get the higher graded armor the same with the weapon creation.